Product details
| Part number | VEP-A00-P |
|---|---|
| Description | VEP with LEDs 4-PIPE |
| Category | Detectors & Bases / Aspirating & Duct Sampling |
| System | Fire alarm systems |
| Works with | 4100ES, 4010ES and 4007ES (IDNet, system firmware 6.02.02 or higher) |
| Approvals | UL, ULC and CSFM listed |
| Availability | On request, ask for lead time |
| Support | Selection, compatibility and programming help from our engineers |
Need it for a project?
Tell us the quantity and the panel or system it is for. We confirm compatibility, price and delivery, and can install and program it.
About the VEP-A00-P
VESDA-E VEP aspirating smoke detector for up to four sampling pipes, with LED status indicators and the Flair detection chamber. Simplex supplies it as 4098-VEP-A00-P with onboard IDNet communications, so it connects directly to the IDNet loop of 4007ES, 4010ES and 4100ES panels and reports four alarm levels, faults and smoke readings; each further pipe takes the next IDNet address automatically. It covers up to 21,528 sq. ft. (2,000 m²) with up to 1,542 ft (470 m) of branched pipe.
Set the IDNet base address with the Xtralis VSC software; the following addresses are assigned automatically.
Specifications
| Supply voltage | 18 VDC to 30 VDC (24 V nominal) |
|---|---|
| Current at 24 VDC | 0.29 A to 0.38 A quiescent, 0.32 A to 0.41 A in alarm (aspirator setting 1 to 5) |
| Area coverage | 21,528 sq. ft. (2,000 m²) |
| Pipe length | 919 ft (280 m) linear; 1,542 ft (470 m) branched |
| Sampling holes | 80 |
| Relays | Seven pre-configured relays, contacts rated 2 A at 30 VDC (resistive) |
| Operating ambient | 32°F to 100°F (0°C to 38°C) |
| Dimensions (W x H x D) | 13.8 in. x 8.9 in. x 5.3 in. (350 mm x 225 mm x 135 mm) |
Used with
- VSP-960 – VESDA-E mounting bracket
- VSP-961 – VESDA-E exhaust adaptor US
- VSP-962 – VESDA-E filter
- VSP-963 – VESDA-E aspirator
From Simplex datasheet S4098-0056. The datasheet can be downloaded under Documents above.