Product details
| Part number | 4098-5254 |
|---|---|
| Description | Photoelectric Heat CO Sensor |
| Category | Detectors & Bases / Smoke, Heat & Multi Sensors |
| System | Simplex TrueAlarm detectors and TrueAlert appliances |
| Works with | 4100ES with MX Loop Module, 4010ES with MX Loop Module, 4100U with MX Loop Module |
| Approvals | UL listed (smoke sensors to UL 268, heat sensors to UL 521) |
| Availability | On request, ask for lead time |
| Support | Selection, compatibility and programming help from our engineers |
Need it for a project?
Tell us the quantity and the panel or system it is for. We confirm compatibility, price and delivery, and can install and program it.
About the 4098-5254
MX Technology addressable triple sensor that combines the 850 series photoelectric and heat sensors with a CO sensor, and has built-in short circuit isolation. It monitors smoke, heat and CO levels at the same time to determine the presence of fire, for life safety applications and for locations where conditions are difficult for standard sensors. It is used with 4100ES, 4010ES and 4100U panels equipped with an MX Loop Module.
On a sounder base the sensor and base need 2 addresses, and 3 on a sounder-beacon base.
Specifications
| Communications | MX Loop, 1 address for each sensor base |
|---|---|
| Current | 350 µA supervisory; 4.0 mA maximum in alarm |
| Operating temperature | 32° to 100° F (0° to 38° C), indoor use only |
| Humidity | up to 93% RH at 32° C (90° F) |
| Sensor dimensions | 109 mm x 43 mm (4 ¼” x 1 11⁄16”) |
| Base wire connections | Terminal blocks, for wire size 20 to 14 AWG (0.5 to 2.5 mm2, or two, 1.5 mm2) |
| Installation instructions | 579-1088 |
Used with
- 4098-5260 – 4" addressable continuity base 4B-C UL
- 4098-5261 – 4" detector base, when isolation is not required
- 4098-5215 – Loop powered sounder base
- 4098-5212 – Loop powered sounder-beacon base
- 2098-9808 – Remote LED alarm indicator
From Simplex datasheet S4906-0016. The datasheet can be downloaded under Documents above.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.