Product details
| Part number | 2099-9756 |
|---|---|
| Description | Pull Station D/A, in/O |
| Category | Manual Call Points & Release Stations / Manual Call Points / Pull Stations |
| System | Simplex fire alarm systems |
| Approvals | UL listed to UL 38; ULC and CSFM listed; FM approved; MEA (NYC) accepted |
| Availability | On request, ask for lead time |
| Support | Selection, compatibility and programming help from our engineers |
Need it for a project?
Tell us the quantity and the panel or system it is for. We confirm compatibility, price and delivery, and can install and program it.
About the 2099-9756
Non-addressable double action manual fire alarm station of the push type, without annunciator contacts. The user pushes back a spring-loaded plate marked PUSH to reach the pull lever, then pulls it; the lever latches in the alarm position. A key is needed to reset the station.
A break-rod is supplied; its use is optional, and a used break-rod must be replaced when the station is reset.
Specifications
| Operation | Double action, push type (general alarm) |
|---|---|
| Mounting | Semi-flush: standard single gang switch box, 64 mm deep, not recessed; surface: Wiremold V5744S box |
| Wire connections | Screw terminal for in/out wiring, for 18 AWG to 14 AWG wire |
| UL listed temperature range | 32°F to 120°F (0°C to 49°C) intended for indoor operation |
| Humidity range | Up to 93% RH at 100°F (38°C) |
| Housing | Red with white raised lettering; high impact polycarbonate |
| Housing dimensions | 5 in. H x 3 3/4 in. W x 1 in. D (127 mm x 95 mm x 25 mm) |
Used with
- 2099-9819 – Flush adapter kit, black
- 252-019 – B key for manual station reset
- 2099-9804 – Replacement break-rod
From Simplex datasheet S2099-0007. The datasheet can be downloaded under Documents above.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.